Product ID:FRIXTEC 19850
MSDS Date:05/01/1986
FSC:3439
NIIN:00-300-0539
MSDS Number: BPMGS

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-9981
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000;312-932-1210

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME/1 DUST

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST/5 FUME

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SHORT TERM OVEREXP TO FUMES,
GASES & DUST MAY RESULT IN DISCOMFORT SUCH AS DIZZINESS, NAUSEA, OR
DRYNESS OR IRRITATION OF NOSE, THROAT OR EYES. RADIATION CAN INJURE
EYES AND BURN SKIN. METAL FU ME FEVER CAN BE CAUSED BY FRESH COPPER
OXIDE FUME. CHRONIC: LONG TERM OVEREXPOSURE TO FUMES, GASES & (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: DUSTS MAY LEAD TO SIDEROSIS & MAY
AFFECT PULMONARY FUNCTIONS. NO ADVERSE LONG TERM EFFECTS DUE TO
COPPER AND COPPER OXIDE HAVE BEEN REPORTED IN LITERATURE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:REMOVE TO WELL-VENTILATED AREA. CALL FOR MEDICAL AID. EMPLOY
FIRST-AID TECHNIQUES RECOMMENDED BY AMERICAN RED CROSS. INHALATION:
REMOVE FROM EXPOSURE. SUPPORT BREATHING (GIVE ARTIFICIAL
RESPIRATION/OX YGEN) . INGESTION: CALL MD IMMEDIATELY . SKIN: FLUSH
WITH COPIOUS AMOUNTS OF WATER. CALL MD . EYES: FLUSH WITH WATER FOR
AT LEAST 15 MINUTES .

Flash Point:NONFLAMMABLE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE CONDITIONS
.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:METAL POWDER DUST MAY PRESENT FIRE OR
EXPLOSION HAZARD UNDER FAVORABLE CONDITIONS OF PARTICLE SIZE,
DISPERSION AND STRONG IGNITION SOURCE.

Spill Release Procedures:CLEAN-UP BY VACUUMING, WET DUSTMOP/WET
CLEAN-UP. AVOID DUST GENERATION. USE AN APPROP FILTER W/VACUUM
EQUIPMENT TO PREVENT AIRBORNE DUST LEVELS WHICH EXCEED PEL/TLV. IF
AIRBORNE DUST IS GENERATED, USE AN APPROP NIOSH/MSHA APPRVD RESP
DURING CLEAN-UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:READ & UNDERSTAND MFR'S INSTRUCTIONS &
PRECAUTIONARY LABEL ON PRODUCT.
Other Precautions:MAINTAIN EXPOSURE BELOW GIVEN PEL/TLV. USE INDUSTRIAL
HYGIENE MONITORING TO ENSURE THAT USE OF PRODUCT DOES NOT CREATE
EXPOSURE EXCEEDING PEL/TLV. REFER TO GIVEN REFERENCES FOR
ADDITIONAL INFORMATION.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME
RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WORKING IN CONFINED
SPACE OR WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE
BELOW RECOMMENDED EXPOSURE LIM IT.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST AT WORK SITE TO KEEP
FUMES/GASES/DUSTS FROM WORKER'S BRTHG ZONE & GEN AREA. (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOG/FULL LGTH FACESHLD(SUPDAT)
Other Protective Equipment:WEAR HEAD/BODY PROT WHICH HELP TO PVNT INJ
FROM RADIA/FLAMES. AT MIN, THIS INCL ARM PROT,APRONS, HATS,
SHOULDER (SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VENT: TRAIN WORKER TO KEEP HEAD OUT OF FUMES, GASES, AND DUSTS. EYE
PROT: . PROVIDE PROT SCREENS AND GOGGLES, IF NEC, TO SHIELD OTHERS.
AS RULE, START W/SHADE THAT IS TOO DARK TO SEE WORK ZONE; THEN GO
TO NEXT LIGHTER SHADE WHICH GIVES SUFF VIEW OF WORK. OTHER PROT
EQUIP: PROT, AS WELL AS DARK SUBSTANTIAL CLTHG.

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO AND CO*2; O*3 & NO*X MAY BE FORMED
BY RADIATION. COMPLEX OXIDES OF METALS LISTED IN INGREDIENTS
SECTION.

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE, A ND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.